Iron cartridge press (double gun) for 210 ml double cartridges, extra strong push block that prevents the push rod from slipping.

Gluer with roller. Application width: 150 mm

Enables an even and dosed glue application.

Aplicator for PUR hotmelt cartridge adhesive ex :703.5

Fields of application: Wrapping PVC profiles, pretreated aluminium profiles, and wood based profiles with PVC window foils, primered acrylate foils, decorative papers and veneers (also fleece laminated).
Advantages:
Suitable for outdoor use
Approved according to RAL-GZ 716
Application temperature: 120 - 140 C

Fields of application: Wrapping PVC profiles, pretreated aluminium profiles, and wood based profiles with PVC window foils, primered acrylate foils, decorative papers and veneers (also fleece laminated).
Advantages:
Suitable for outdoor use
Approved according to RAL-GZ 716
Application temperature: 120 - 140 C

Fields of application: Wrapping PVC profiles, pretreated aluminium profiles, and wood based profiles with PVC window foils, primered acrylate foils, decorative papers and veneers (also fleece laminated).
Advantages:
Suitable for outdoor use
Approved according to RAL-GZ 716
Application temperature: 120 - 140 C

Fields of application: Bonding of: Wood based materials ,PVC-Foil ,CPL, thick decor paper, veneer
Advantages
Very high green strength with high tack
Heat resistance more than 150 C
Cold resistance up to -40 C
Application temperature: from 140 C to 160 C. (veneer and resign paper can have higher application temperatures)
The required coat weight depends on the material:
1.PVC-Foil: 40-60 g/m^2
2.Decor papers (incl. CPL-Material and thick papers): 50-70 g/m^2
3. Veneers: 80-20 g/m^2

Fields of application: For priming plastic and metal profiles
Advantages:
Because of its fluorescent properties, the primer can be applied uniformly over the complete surface easily.

Fields of application: For priming plastic and metal profiles
Advantages:
Because of its fluorescent properties, the primer can be applied uniformly over the complete surface easily.

Fields of application: For priming Plastic and metal profiles
Application quantity: approx.15 g/m^2

Fields of application: Bonding of: Wood based materials, PVC-Foil CPL, thick decor paperveneer
Advantages
Very high green strength with high tack
Heat resistance more than 150 C
Cold resistance up to -40 C
Application temperature: from 140 C to 160 C. (veneer and resign paper can have higher application temperatures)
The required coat weight depends on the material:
1.PVC-Foil: 40-60 g/m^2
2.Decor papers (incl. CPL-Material and thick papers): 50-70 g/m^2
3.Veneers: 80-20 g/m^2

Polyester based adhesive, containing solvents. Very well suited for wrapping of window profiles with PVC-foils and veneers. Excellent ageing and weather resistance , therefore also suitable for outdoor applications.
Viscosity at 20 C: 2.000 +/- mPa s
Hardener: Hardener 870.0
quantity to be added: 2.5-5%
Open time: without hardener 6-7 minutes
with hardener 4-6 minutes

Polyester based adhesive, containing solvents. Very well suited for wrapping of window profiles with PVC-foils and veneers. Excellent ageing and weather resistance , therefore also suitable for outdoor applications.
Viscosity at 20 C: 2.000 +/- mPa s
Hardener: Hardener 870.0
quantity to be added: 2.5-5%
Open time: without hardener 6-7 minutes
with hardener 4-6 minutes

Component B for adhesive 257.7 and PLASTIC -MASTIC ex: Kleiberit 573.8

Field of application: manufacture of sandwich elements, e.g polystyrene and synthetic ceiling panels.
Soft elastic bond
Good resistance to humidity and the influence of temperature
Consistency: medium viscosity
Open time: approx. 2 hours
Press or fixing times: 20 C: 6-8 hours
                                  40 C: 3-4 hours

Field of application: manufacture of sandwich elements, e.g polystyrene and synthetic ceiling panels.
Soft elastic bond
Good resistance to humidity and the influence of temperature
Consistency: medium viscosity
Open time: approx. 2 hours
Press or fixing times: 20 C: 6-8 hours
                                  40 C: 3-4 hours

Field of application: Manufacture of sandwich elements, e.g EPS/ PUR foam or mineral wool as core material and synthetic panels, coated sheet metal, gypsum fibre boards etc. as cover.
Soft elastic bond
Consistency: medium viscosity
Open time: approx. 1 hour (sprayed with water)
                   approx. 2 hours (dry)
Press or fixing times 
20 C: 2 hours 30 minutes.

Thermoplastic EVA hot melt adhesive for gluing film to wood moldings.
Designed for wrapping chipboard (PAL), wooden slat-type profiles, and MDF boards (medium-density fibreboard) with paper foils.
It works at speeds of 20 m/min and at temperatures of 180-200°C.
It has good film resistance and aging stability.

Thermoplastic EVA hot melt adhesive for gluing film to wood moldings.
Designed for wrapping chipboard (PAL), wooden slat-type profiles, and MDF boards (medium-density fibreboard) with paper foils.
It works at speeds of 20 m/min and at temperatures of 180-200°C.
It has good film resistance and aging stability.

Waterproof white glue. Tested according to EN 14257 (Watt 91)

Suitable for gluing according to stress groups D3 and D4 (with hardener) according to DIN EN 204. Certified for bonding in shipbuilding. Suitable for the production of waterproof gluing. Excellent suitability for making windows, doors and stairs. Gluing hardwoods and exotic woods is possible. Suitable for high frequency gluing. Complies with the strict guidelines of the International Maritime Organization (IMO certificate). Very suitable for Minergie-ECO 1st priority ecoBKP/ecoDevis.

To use as D4 you have to purchase 303.5 Hardener